LED屏专用电源VAT-H200-5

• 品名：LED屏专用电源VA...
• 商品品牌：【鑫诺尔】
• 商品重量：0克
• 上架时间：2015-08-13
• 商品点击数：504

Ø        High Efficiency, and High reliability

Ø        Output protections: SCP/OVP/OPP/OLP

Ø        Wide operating ambient temperature (-40℃~65℃)

Ø        All using 105℃ long life electrolytic capacitors.

Ø        100% full load burn-in test

Ø        1 year warranty     

 

SPECIFICATION

MODEL			VAT-H200-5
OUTPUT	DC Output		5V
	Rated Current		40A
	Current Range     Note 1		0~40A
	Ripple and Noise  Note 2	0~65℃	200mV
	Voltage ADJ.  Range		±10% of rated output voltage
	Voltage Accuracy		±2.0%
	Line Regulation		±0.5%
	Load Regulation		±2.0%
	Set-up Time		＜2.0S (220Vac input, Full load)
	Hold up Time		＞10mS(220Vac input, Full load)
	Temperature Coefficient		±0.03%/℃
	Overshoot and Undershoot		<5.0%
INPUT	Voltage Range		176Vac~264Vac
	Frequency Range		47Hz~63Hz
	Efficiency ( Typical)		81%(220Vac input)
	AC Current (max.)		2.5A
	Inrush Current (Typical)		45A@220Vac      Cold start
	Leakage Current		Input—output:<0.25mA     Input—PG:<0.5mA
PROTECTION	Over Power		105%~150% of rated output power, auto recovery
	Over Current		105%~150% of rated output current, auto recovery
	Over Voltage		105%~150% of rated output voltage, auto recovery
	Shorted Circuit		Long-term mode, auto recovery
ENVIRONMENT	Operating amb. Temp. & Hum.		-40℃~65℃;  20%~90%RH  No condensing
	Storage Temp. & Hum.		-40℃~85℃;  10%~95%RH  No condensing
SAFETY &EMC Note 3	Safety Standards		GB4943-2001; EN60950-1：2006
	Withstand Voltage		Primary-Secondary:3.0KVac; ≤10mA .Primary-PG:1.5KVac; ≤10mA. Secondary-PG:0.5KVDC;≤10mA.
	Isolation Resistance		≥100M ohms
	EMI Conduction&Radiation		/
	Harmonic Current		/
	EMS Immunity		Compliance to EN61000-4-2,3,4,5,6,8,11;ENV50204,light industry level,criteriaA
OTHERS	MTBF (MIL-HDBK-217F)		More than 100,000Hrs (25℃, Full load)
	Dimension  (L*W*H)		199×99×50mm
	Packing
	Cooling method		Cooling by free air convection
NOTE	1.     All parameters NOT specially mentioned are measured at rated input, rated load and 25℃ of ambient temperature. 2.     Measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1 uF & 10uF parallel capacitor. 3.  The SPS is considered a component which will be installed into final equipment. The equipment must be re-confirmed that it still meets EMC directives.

n      Mechanical Specification                                            Unit: mm Pin No. Assignment 1 AC-L 2 AC-N 3 F.G 4/5/6 DC output -V 7/8/9 DC output +V n      Block Diagram n      Derating Curve

如何购买

售后服务

用户评论

(共0条评论)

• 暂时还没有任何用户评论

总计 0 个记录，共 1 页。

第一页 上一页 下一页 最末页

用户名：	匿名用户
E-mail：
评价等级：
评论内容：
验证码：