Vertical System
|
| Analog (ProLink Input) Bandwidth @ 50 Ω (-3 dB) |
20 GHz
(≥10 mV/div) |
| Analog (ProBus Input) Bandwidth @ 50 Ω (-3 dB) |
For 9xxMZi-A "Master" Acquisition Unit: 3.5 GHz (≥10 mV/div) |
| Analog (ProBus Input) Bandwidth @ 1 MΩ (-3 dB) |
For 9xxMZi-A "Master" Acquisition Unit: 500 MHz (typical, ≥2 mV/div) |
| Analog Bandwidth @ 50 Ω (-3 dB) (2.4/2.92 Inputs) |
Not Applicable |
| Rise Time (typical, 10-90%, 50 Ω) |
22 ps
(test limit, flatness mode) |
| Rise Time (typical, 20-80%, 50 Ω) |
16.5 ps
(flatness mode) |
| Input Channels |
Up to 20, depending on configuration selected.
(Any combination of up to 20 ProLink input channels, or 4 ProBus input channels) |
| Bandwidth Limiters |
20 MHz, 200 MHz, 1 GHz, 4 GHz, 6 GHz, 8 GHz, 13 GHz, 16 GHz |
| Input Impedance |
ProLink Inputs: 50 Ω+/-2% for ≤100 mV/div, 50 Ω+/-3% for >100 mV/div
ProBus Inputs: 50 Ω+/-2% or 1 MΩ||16pF, 10 MΩ || 11 pF with supplied Probe |
| Input Coupling |
ProLink Inputs - 50 Ω: DC, GND
ProBus Inputs - 1 MΩ: AC, DC, GND; 50 Ω: DC, GND |
| Maximum Input Voltage |
50 Ω (ProLink): ±2 Vmax@≤100mV/div, 5.5Vrms@>100mV/div
50 Ω (ProBus): ±5 Vmax, 3.5 Vrms
1 MΩ (ProBus): 250 V max. (peak AC: < 10 kHz + DC) |
| Channel-Channel Isolation |
DC to 10 GHz: 50 dB (>315:1)
10 to 15 GHz: 46 dB (>200:1)
15 to 20 GHz: 40 dB (>100:1)
(For any two ProLink input channels, same or different v/div settings, typical) |
| Vertical Resolution |
8 bits; up to 11 bits with enhanced resolution (ERES) |
| Sensitivity |
50 Ω (ProLink): 2 mV-1 V/div, fully variable (2-9.9 mV/div via zoom)
50 Ω (ProBus): 2 mV-1 V/div, fully variable; 1 MΩ (ProBus): 2 mV-10 V/div, fully variable |
| DC Vertical Gain Accuracy (Gain Component of DC Accuracy) |
±1% F.S. (typical), offset at 0V; ±1.5% F.S. (test limit), offset at 0V |
| Offset Range |
50 Ω (ProLink):
±500 mV @ 2-100 mV/div
±4 V @ >100 mV/div -1 V/div
50 Ω (ProBus):
±750 mV @ 2-100 mV/div
±4 V @ >100 mV/div -1 V/div
1 MΩ:
±1V @ 2-140 mV/div
±10V @ 142mV-1.40V/div
±100V @ 1.42V-10V/div |
| DC Vertical Offset Accuracy |
±(1.5% of offset setting + 1 mV) (test limit) |
| |
Horizontal System
|
| Timebases |
Internal timebase with 10 GHz clock frequency common to all input channels. Single, distributed 10 GHz clock for all channels ensures that timing accuracy amongst all channels is identical to that provided within a single, standard oscilloscope package. |
| Time/Division Range |
20 ps/div-128 s/div (Real-Time Mode: 20 ps/div - 64 s/div; RIS mode: 20 ps/div - 10 ns/div, user selectable at ≤10ns/div; Roll mode: Not available |
| Clock Accuracy |
< 1 ppm + (aging of 0.5ppm/yr from last calibration) |
| Time Interval Accuracy |
< 0.06 / SR + (clock accuracy* Reading) (rms) |
| Jitter Noise Floor |
For Acq. Length ≤10μs: 190 fsrms (TIE, typical)
For Acq. Length >10μs: 240 fsrms (TIE, typical) |
| Trigger and Interpolator Jitter |
<0.1 psrms (typical, software assisted), 2 psrms (typical, hardware), |
| Channel-Channel Deskew Range |
±9 x time/div. Setting or 25 ns max. (whichever is larger), each channel |
| External Timebase Reference (Input) |
10 MHz; 50 Ω impedance, applied at the rear input |
| External Timebase Reference (Output) |
10 MHz; 50 Ω impedance, output at the rear |
| External Clock |
Not Available |
| |
Acquisition System
|
| Single-Shot Sample Rate/Ch |
40 GS/s on each channel.
(80 GS/s when combining channels using the optional WM8Zi-2X80GS External Interleaving Device) |
| Random Interleaved Sampling (RIS) |
200 GS/s for repetitive signals (20 ps/div to 10 ns/div) |
| Maximum Trigger Rate |
1,000,000 waveforms/second (in Sequence Mode, up to 4 channels) |
| Intersegment Time |
1 μs |
| Memory Options (4 Ch / 2 Ch / 1Ch) |
S-32 Option:
32M / 32M / 32M
(7,500)
M-64 Option:
64M / 64M / 64M
(15,000)
L-128 Option:
128M / 128M / 128M
(15,000)
VL-256 Option:
256M / 256M / 256M
(15,000)
Note: On all memory options, memory and sample Rate can be doubled in half channel mode with use of WM8Zi-2X80GS External Interleaving Device. |
| Standard Memory (4 Ch / 2 Ch / 1Ch) (Number of Segments) |
20 M / 20 M / 20M
Memory and Sample Rate can be doubled in half channel mode with use of WM8Zi-2X80GS External Interleaving Device.
(2000) |
| Standard Memory (4 Ch / 2 Ch / 1Ch) (Number of Segments) |
20 M / 20 M / 20M
Memory and Sample Rate can be doubled in half channel mode with use of WM8Zi-2X80GS External Interleaving Device.
(2000) |
| |
Acquisition Processing
|
| Averaging |
Summed averaging to 1 million sweeps; continuous averaging to 1 million sweeps |
| Enhanced Resolution (ERES) |
From 8.5 to 11 bits vertical resolution |
| Envelope (Extrema) |
Envelope, floor, or roof for up to 1 million sweeps |
| Interpolation |
Linear or Sin x/x |
| |
Triggering System
|
| Modes |
Normal, Auto, Single, and Stop |
| Sources |
Any 9xxMZi-A "Master" Acquisition Unit input channel, Aux, Aux/10, Line, or Fast Edge. Slope and level unique to each source (except line trigger). |
| Coupling Mode |
DC, AC, HFRej, LFRej |
| Pre-trigger Delay |
0-100% of memory size (adjustable in 1% increments of 100 ns) |
| Post-trigger Delay |
0-10,000 divisions in real time mode, limited at slower time/div settings or in roll mode |
| Hold-off by Time |
From 2 ns up to 20 s or from 1 to 99,999,999 events |
| Internal Trigger Range |
±4.1 div from center |
| Trigger Sensitivity with Edge Trigger (Ch 1-4) 2.4/2.92mm Inputs |
Not Applicable |
| Trigger Sensitivity with Edge Trigger (Ch 1–4) ProBus Inputs |
2 div @ < 3.5 GHz,
1.5 div @ < 1.75 GHz,
1.0 div @ < 200 MHz,
(for DC coupling, ≥ 10 mV/div, 50 Ω ) |
| Trigger Sensitivity with Edge Trigger (Ch 1–4) ProLink Inputs |
For 9xxMZi "Master" Acquisition Unit:
3 div @ < 15 GHz,
1.5 div @ < 3 GHz,
1.0 div @ < 200 MHz,
(for DC, AC, LFRej coupling, ≥ 10 mV/div, 50 Ω ) |
| External Trigger Sensitivity, (Edge Trigger) |
For 9xxMZi "Master" Acquisition Unit:
2 div @ < 1 GHz,
1.5 div @ < 500 MHz,
1.0 div @ < 200 MHz,
(for DC coupling) |
| External Trigger Input Range |
For 9xxMZi-A "Master" Acquisition Unit: Aux (±0.4 V); Aux/10 (±4 V) |
| Max. Trigger Frequency, SMART Trigger |
For 9xxMZi-A "Master" Acquisition Unit:
2.0 GHz @ ≥ 10 mV/div (minimum triggerable width 200 ps) |
| |
Basic Triggers
|
| Edge |
Triggers when signal meets slope (positive, negative, or either) and level condition. |
| Window |
Triggers when signal exits a window defined by adjustable thresholds |
| TV-Composite Video |
Triggers NTSC or PAL with selectable line and field; HDTV (720p, 1080i, 1080p) with selectable frame rate (50 or 60 Hz) and Line; or CUSTOM with selectable Fields (1-8), Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz), Interlacing (1:1, 2:1, 4:1, 8:1), or Synch Pulse Slope (Positive or Negative). |
| |
SMART Triggers
|
| State or Edge Qualified |
Triggers on any input source only if a defined state or edge occurred on another input source. Holdoff between sources is selectable by time or events. |
| Qualified First |
In Sequence acquisition mode, triggers repeatably on event B only if a defined pattern, state, or edge (event A) is satisfied in the first segment of the acquisition. Holdoff between sources is selectable by time or events. |
| Dropout |
Triggers if signal drops out for longer than selected time between 1 ns and 20 s. |
| Pattern |
Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input). Each source can be high, low, or don?t care. The High and Low level can be selected independently. Triggers at start or end of the pattern. |
| |
SMART Triggers with Exclusion Technology
|
| Glitch |
Triggers on positive or negative glitches with widths selectable as low as 200ps to 20 s, or on intermittent faults. |
| Width (Signal or Pattern) |
Triggers on positive, negative, or both widths with widths selectable as low as 200ps to 20 s, or on intermittent faults. |
| Interval (Signal or Pattern) |
Triggers on intervals selectable between 1 ns and 20 s. |
| Timeout (State/Edge Qualified) |
Triggers on any source if a given state (or transition edge) has occurred on another source.
Delay between sources is 1 ns to 20 s, or 1 to 99,999,999 events. |
| Runt |
Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 ns. |
| Slew Rate |
Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 ns. |
| Exclusion Triggering |
Trigger on intermittent faults by specifying the expected behavior and triggering when that condition is not met |
| |
Cascade (Sequence) Triggering
|
| Capability |
Arm on "A" event, then Trigger on "B" event. Or Arm on "A" event, then Qualify on "B" event, and Trigger on "C" event. Or Arm on "A" event, then Qualify on "B" then "C" event, and Trigger on "D" event |
| Types |
A, B, C, or D event: Edge, Glitch, Width, Window, Dropout, Interval, Runt, Slew Rate, or Pattern (analog) |
| Holdoff |
Holdoff between A and B, B and C, C or D, or any is selectable by time or number of events |
| Reset |
Reset between A and B, B and C, C and D, or any combination is selectable in time or number of events |
| |
High Speed Serial Protocol Triggering
|
| Data Rates |
(Option LM9Zi-HSPT, for signals connected to 9xxMZi-A "Master" Acquisition Unit Channel 4 input) 100 Mb/s - 2.7 Gb/s, 3.0, 3.125 Gb/s |
| Pattern Length |
80 bits, NRZ or 8b10b |
| Clock and Data Outputs |
400mVp-p (typical) AC coupled |
| Clock Recovery Jitter |
2 psrms + 0.3% Unit Interval rms for PRBS data patterns with 50% transition density (typical) |
| Hardware Clock Recovery Loop BW |
PLL Loop BW = Fbaud/5500, 100 Mb/s to 2.488 Gb/s (typical) |
| |
Low Speed Serial Protocol Triggering (Optional)
|
| Optionally available |
I2C, SPI (SPI, SSPI, SIOP), UART-RS232, CAN, LIN, FlexRay, I2S (Audio), MIL-1553 |
| |
Color Waveform Display
|
| Type |
On 9xxMZi-A "Master" Acquisition Unit: Color 15.3" flat panel TFT-Active Matrix LCD with high resolution touch screen |
| Resolution |
WXGA; 1280 x 768 pixels. |
| Number of traces |
Display a maximum of 40 traces. Simultaneously display channel, zoom, memory and math traces. |
| Grid Styles |
Auto, Single, Dual, Quad, Octal, X-Y, Single+X-Y, Dual+X-Y, Twelve, Sixteen, Twenty |
| Waveform Representation |
Sample dots joined, or sample dots only |
| |
Internal Waveform Memory
|
| Internal Waveform Memory |
4 active waveform memory traces (M1-M4) store 16 bit/point full length waveforms. Waveforms can be stored to any number of files limited only by the data storage media capacity. |
| |
LeCroy WaveStream™ Fast Viewing Mode
|
| Intensity |
256 Intensity Levels, 1-100% adjustable via front panel control |
| Types |
Select analog or color-graded |
| Number of Channels |
up to 4 simultaneously |
| Max Sampling Rate |
40 GS/s (80 GS/s with optional WM8Zi-2X80GS external interleaving device) |
| Persistence Aging |
Select from 500 ms to Infinity |
| Waveforms/second (continuous) |
up to 2500 Waveforms/second |
| Operation |
Front panel toggle between WaveStream ON (Analog), ON (Color) and OFF |
| |
Automatic Setup
|
| Auto Setup |
Automatically sets timebase, trigger, and sensitivity to display a wide range of repetitive signals |
| Find Vertical Scale |
Automatically sets the vertical sensitivity and offset for the selected channel to display a waveform with the maximum dynamic range |
| |
Probes
|
| Probes |
9xxMZi-A Models: Acquisition Unit: Qty. (4) ÷10 Passive Probes
9xxSZi-A Models: No passive probes supplied |
| Probing System |
9xxMZi-A "Master" Acquisition Unit: Probus and ProLink.
9xxSZi-A "Slave" Acquisition Unit: ProLink.
Automatically detects and supports a variety of compatible probes. |
| Scale Factors |
Automatically or manually selected depending on probe used |
| Calibration Output |
9xxMZi-A "Master" Acquisition Unit: 1kHz square wave, 1Vp-p (typical), output to probe hook |
| |
Integrated Second Display
|
| Type |
Color 15.3" flat panel TFT-Active Matrix LCD with high resolution touch screen.
Requires ordering of option LM9Zi-VIDEOCARD-Zi-EXTDISP-15 to relace the standard video card in the LabMaster CPU, so performance described below in "External Monitor Port" is no longer provided. DVI and power connector provided to support LeCroy Zi-EXTDISP-15 additional touch screen display accessory. Includes support for extended desktop operation. |
| Resolution |
WXGA; 1280 x 768 pixels |
| |
Analog Persistence Display
|
| Analog and Color-Graded Persistence |
Variable saturation levels; stores each trace's persistence data in memory |
| Trace Selection |
Activate persistence on all or any combination of traces |
| Sweep Display Modes |
All accumulated, or all accumulated with last trace highlighted |
| Persistence Types |
Select analog, color, or three-dimensional |
| Persistence Aging |
Select from 500 ms to infinity |
| |
High Speed Digitizer Output (Option)
|
| Type |
Option LSIB-1. Installs in LabMaster 9xxMZi-A CPU and uses one available PCIe slot normally used by a 9xxSZi-A unit. |
| Transfer Rate |
up to 325 MB/s (typical) |
| Output Protocol |
PCI Express, Gen 1 (4 lanes utilized for data transfer) |
| Control Protocol |
TCP/IP |
| Command Set |
Via Windows Automation, or via LeCroy Remote Command Set |
| |
Processor/CPU
|
| Type |
In 9xxMZi-A CPU: Intel® XeonTM X5660 2.8 GHz (or better). There are two processors in each CPU, and each processor has 6 cores for a total of 12 cores and an effective processor speed of 33.6 GHz. |
| Processor Memory |
24 GB standard. Up to 192 GB optionally available. |
| Operating System |
Microsoft Windows® 7 Professional Edition (64-bit) |
| Real Time Clock |
Date and time displayed with waveform in hardcopy files. SNTP support to synchronize to precision internal clocks. |
| |
Zoom Expansion Traces
|
| Zoom Expansion Traces |
Display up to 20 channels and up to 4 Memory, 8 Math, and 4 Zoom traces |
| |
Setup Storage
|
| Front Panel and Instrument Status |
Store to the internal hard drive, over a network, or to a USB-connected peripheral device. |
| |
Interface
|
| Remote Control |
Via Windows Automation, or via LeCroy Remote Command Set |
| Network Communication Standard |
VXI-11 or VICP, LXI Class C (v1.2) Compliant |
| GPIB Port (optional) |
Supports IEEE - 488.2. Installs in LabMaster 9xxMZi-A CPU and uses one available PCIe slot normally used by a 9xxSZi-A unit. |
| LSIB Port (optional) |
Supports PCIe Gen1 x4 protocol with LeCroy supplied API. Installs in LabMaster 9xxMZi-A CPU and uses one available PCIe slot normally used by a 9xxSZi-A unit. |
| Ethernet Port |
Supports 10/100/1000BaseT Ethernet interface (RJ45 port) |
| USB Ports |
9xxMZi-A CPU: minimum 2 total USB 2.0 ports support Windows compatible devices
9xxMZi "Master" Acquisition Unit: minimum 3 total USB 2.0 ports support Windows compatible devices. |
| External Monitor Port |
In 9xxMZi-A CPU:
Dual Link DVI compatible to support 9xxMZi-A "Master" Acquisition Unit internal display (1280 x 768 pixel resolution) or customer-supplied monitor with up to WQXGA (2560 x 1600 pixel) resolution.
15 pin D-Type WXGA compatible to support customer-supplied external monitor.
Only one monitor can operate at a time. |
| Serial Port |
Not Available |
| Peripheral Bus |
9xxMZi-A "Master" Acquisition Module: LeCroy LBUS standard (not supported when Slave Acquisition Module is connected). |
| |
Auxiliary Input
|
| Signal Types |
For External Trigger Input. Located in 9zzMZi-A "Master" Acquisition Unit only. |
| Coupling |
9xxMZi-A "Master" Acquisition Unit: 50 Ω: DC; 1 MΩ: AC, DC, GND |
| Max. Input Voltage |
9xxMZi-A "Master" Acquisition Unit: 5 Vrms (50 Ω); 250 V (Peak AC < 10 kHz + DC) (1 MΩ) |
| |
Auxiliary Output
|
| Connector Type |
BNC, located on front of 9xxMZi-A "Master" Acquisition Unit |
| Signal Types |
9xxMZi-A "Master" Acquisition Unit: Select from calibrator, control signals or Off |
| Output Signal |
500 Hz-5 MHz square wave or DC level; 0.0 to 500 mV into 50 Ω (0-1 V into 1 MΩ) |
| Control Signals |
Trigger enabled, trigger out, pass/fail status, off |
| |
General
|
| Auto Calibration |
Ensures specified DC and timing accuracy is maintained for 1 year minimum. |
| |
Power Requirements
|
| Voltage |
LabMaster 9xxMZi-A "Master" Acquisition Unit and 9xxSZi-A: 100-240 VAC ±10% at 45-66 Hz; 100-120 VAC ±10% at 380-420 Hz; Automatic AC Voltage Selection, Installation Category II
LabMaster 9xxMZi-A CPU: 100-240 VAC ±10% at 45-66 Hz; Automatic AC Voltage Selection, Installation Category II |
| Max. Power Consumption |
9xxMZi-A "Master" Acquisition Unit - 850 W / 850 VA.
9xxMZi-A CPU - 400 W / 400 VA.
9xxSZi-A "Slave" Acquisition Unit - 700 W / 700 VA.
Each unit has a separate power cord. |
| |
Environmental and Safety
|
| Temperature (Operating) |
+5 °C to +40 °C |
| Temperature (Non-Operating) |
-20 °C to +60 °C |
| Humidity (Operating) |
5% to 80% relative humidity (non-condensing) up to +31 °C.
Upper limit derates to 50% relative humidity (non-condensing) at +40 °C. |
| Humidity (Non-Operating) |
5% to 95% relative humidity (non-condensing) as tested per MIL-PRF-28800F |
| Altitude (Operating) |
Up to 10,000 ft. (3048 m) at or below +25 °C |
| Altitude (Non-Operating) |
Up to 40,000 ft. (12,192 m) |
| Random Vibration (Operating) |
0.5 grms 5 Hz to 500 Hz, 15 minutes in each of three orthogonal axes |
| Random Vibration (Non-Operating) |
2.4 grms 5 Hz to 500 Hz, 15 minutes in each of three orthogonal axes |
| Functional Shock |
20 g peak, half sine, 11 ms pulse, 3 shocks (positive and negative) in each of three orthogonal axes, 18 shocks total |
| |
Physical Dimensions
|
| Dimensions (HWD) |
9xxMZi-A "Master" Acquisition Unit - 14"H x 18.4"W x 16"D (355 x 467 x 406 mm).
9xxMZi-A CPU - 5.7"H x 18.2"W x 20.8"D (145mm x 462mm x 527mm).
9xxSZi-A "Slave" Acquisition Unit - 7"H x 18.2"W x 20.8"D (177mm x 462mm x 527mm). |
| Weight |
9xxMZi-A "Master" Acquisition Unit - 48 lbs. (22 kg)
9xxMZi-A CPU - 29 lbs. (13 kg)
9xxSZi-A "Slave" Acquisition Unit - 37 lbs. (17 kg) |
| Shipping Weight |
9xxMZi-A "Master" Acquisition Unit - 70 lbs. (32 kg)
9xxMZi-A CPU - 36 lbs. (16 kg)
9xxSZi-A "Slave" Acquisition Unit - 44 lbs. (20 kg) |
195513967
北京岳立天成科技有限公司